It´s no problem to construct turning parts - it´s however hard job to make any ´wheel´ moving really round. Numberless engineers permanent are busy to avoid or get rid of unbalance at any kind of machines. Otherwise come up enormous forces up to self-destroying of engine. At any case, movements of unbalance run into directions not wanted, thus these forces get lost for benefit of apparatus.
Each combustion engine for example, by itself ´shakes´ into all directions. Motors are to ´keep still´ only by complex counter-weights or balancing-shafts with eccentric masses. These additional masses demand power only for acceleration and deceleration, however no power input is demanded when motor runs constant revolutions (only for friction losses).
Vectors of unwelcome movements are compensated by these measures. Each given force can be transformed by additional force(s) to weaker or stronger resulting force, with any vector wanted. Previous combustion engine for example could easily be ´tuned´ to incline steady to left side.
If this left-tuned combustion motor would be mounted at an eccentric axis, whole block would steady turn left around this axis. Cause at constant revolutions no power-input is demanded, not complete motor but only these parts producing unbalance would do same job.
It´s common understanding: to keep turning exactly balanced, wheel demands energy input only for compensation of friction losses. To keep turning un-balanced wheel, demands only little bit more energy for compensation of little bit more friction losses. Practically without costs however come up enormous forces, so mass of few grams weight shows affects like by the ton.
 |
|
Forces of unbalance pull at axis into revolving directions. Now this axis must be mounted turnable around an other axis, or that second axis must be beard eccentric around third axis. Then forces of unbalance lastly pull system into circled track - producing turning momentum by practically no costs.
This crop-circle-picture is called ´Three Half-Moons´. This motif appeared within short time at several places. I analysed these ´constructional drawings´ intensive at various chapters of my website. Instead of seeing half-moons, one also can imagine three rings arranged around an axis, close to each other at shifted points, each eccentric to next - and one can interpret this picture to serve previous functions of movements.
Detailed analyses and concepts of un-balance-machines are described at chapter Ring-Wheel-Motor. Above this, many other constructions naturally could transfer forces of un-balance into usable turning momentum. If knowhow of specialists (for elimination of unbalance-forces) would be focussed onto this aim (to create benefits of unbalance-forces), indeed would exist ´danger´ to design and construct motors with efficiency much higher than hundred percent, by sure, within short time.
Art of construction of round running combustion engines is, to transform bundle of rather un-symmetric forces and vectors into most perfect symmetry of all affecting forces. Undoubtedly, by same skills could be achieved opposite aim: by some originally symmetric effecting forces to create most usable asymmetry of resulting force, i.e. to produce benefit of turning momentum.
For example it´s well known, asymmetry of earth-moon-system is rather important for appearances at this planet. So concept of this movement´s system could be an other valuable hint for solutions.
Double-Star-System
Earth plus moon build an double-star-system. Both masses rotate around combined centre of masses, i.e. around axis eccentric to earth centre. In addition, earth rotates around its axis. So earth surface moves by different speeds within space, relative slow at side of moon and relative fast opposite of moon.
Water masses of oceans not completely join in that acceleration and deceleration. At moon-side, tide runs ahead of earth by high tide. Opposite of moon, tide is some smaller cause building wave rolling backward relative to earth. So two waves run around earth, as large wave spilling ahead fast, as small wave backward swinging some slower. These movements at a whole affect ´thrust´ onto coasts.
These movements of waters are well known, however explained by common science still (nevertheless completely false) as affect of ´attracting forces´ (which can´t really exist) of moon.
These movement´s process is easy to copy by mechanics, e.g. by construction analogue to following animation. Central turning point is represented by system axis, at which is mounted turnably a gear-wheel (black). Also turnable around system axis is installed a rotor-arm (grey), within which a rotor (green) is mounted eccentric and turnable. Rotor inside is build as gear-rim, interacting with previous gear-wheel. If now rotor arm turns around system axis and gear-wheel turns faster same direction, rotor shows movements analogue to earth within its double-star-system.
 |
 |
I called this principle of design as ´Moon-Gear´ and applied these constructional elements at various designs, for example at this animation. Here is shown an ´ocean´ (blue), however inside of ´earth-crust´ (dark green). Effective mass of ´sea´ naturally could also be solid body within this machine.
Here ´sea-floor´ is arranged eccentric, so ´coasts´ are represented. By acceleration and deceleration of earth-crust, (water-) masses slop ahead and back, come near to system axis and move off (here after each full rotation, see distance between black and blue, with maximum upside left).
Kinetic energy of effective mass keeps constant, cause mass running inward-ahead and is moving outward-back, in relation to average angles speed. However important is, mass weights onto sloped surface of ´coast´, all times into direction outward-ahead, at inward-phase like at outward-movement, i.e. there exists permanent turning momentum in turning sense of system.
This moon-gear is described in details e.g. at chapter Double-Star-Motor. There, at first are described ´Sun-Wheels´ - based at many crop-circle picture of this motif (all showing ´sickles´ like at picture above). Previous described construction shows only one ´Half-Moon-Sickle´ as effective mass, thus is called Half-Moon-Motor. However, this principle of construction and usage of effects is to realize by most different versions.
Fire-Wheel-Motor
Likely frequent and likely impressive are many crop-circle picture with motif of ´Fire-Wheel´. Also these designs are easy to re-build by machines with minimum parts moved. Also this motor is described in details at chapter Double-Star-Motor (some further down). Essential principle of movements is demonstrated by following animation.
 |
|
Mass at the one hand turns around system axis, at the other hand mass turns around rotor axis. Mass is accelerated and decelerated, moved outward and again guided inward (here each full turn). Mass thereby is accelerated at outward opening spiral track, where relative small centrifugal forces come up. Mass is decelerated at inward bended spiral track (becoming more and more narrow) - and mass resists versus this movement by rather strong forces (counter relative strong centrifugal forces).
Mass at these backward showing rods moves other kind than corresponding attaching-point some ahead. Previous forces affect radial to rotor axis, differences of these forces however affect at lever-arm between rotor- and system-axis. So rotor is pulled around system axis and usable turning momentum results.
So effects of slinging-outwards and forcing-inward exist, with asymmetric resulting force, affecting at shifted lever arms, in addition eccentric rotating at effective lever arm around system axis.
Process of movements and affects of forces, indeed are not quite easy to grasp. However at very first sight one realizes, this construction is ´very nice´ and simple as well - and as a rule, both are criteria for most effective solutions. Even picture ´standing still´ of crop-circle fire-wheels seem ´incredible´ dynamic.
At examples of rotor systems of this chapter, thus well known movement´s pattern of earth plus moon is rebuild - of which results movements of oceans ´for nothing´. Undoubtedly these waves affect ´thrust´ when rolling onto coasts and also gliding-back at sloped surface affects component of pressure same direction. This driving-effects are easy to copy within an engine.
Previous suggestions for effective rotor systems, at the other hand are based at ´mystery´ of crop-circles resp. some preferred motifs of. Many crop-circles are fake, by sure, however by same certainty, some are authentic and thus ´not from this world´. That´s a real physical phenomenon - and that´s why production and messages are to investigate honestly. I tried to contribute ideas concerning probable importance of these appearances for usage of Free Energy.
Starting points and ideas of this chapter and previous chapter Flying Wheels should well be sufficient for specialists to develop and realize really running machines. At following chapter Clear Mechanics finally are mentioned only some concluding points of view.
Evert / 23.02.2004
| Best@Evert | Index / Sitemap | Starting Page |