Manfred Jelinski organized some sessions of remote viewing at target of Bessler-Wheel in 2001. I reported about results by chapter Remote Viewing. Who doesn´t know or remember, at first should study this chapter.
I did many considerations concerning Bessler at diverse chapters of this website, best to find via Index / Sitemap or in chronological sequence of News@Evert. There are lots of other websites concerning self-running wheel of Karl Elias Bessler alias Orffyreus (1680-1745).
Concerning Remote Viewing (RV) I put some links into my page External Links and it´s recommended to read some interesting books about this subject.
RV-Technics
Just ´one sentence´ to RV-techniques: an organiser writes question at sheet, puts sheet into envelope, marks envelope by some figures. A monitor tells viewer these ´coordinates´ and guides through session by certain ´protocol´. Viewer goes into some kind of daydream. His mind is kept busy with writing and drawing, impressions of target come only by feelings via all sense organs. It´s job of questioner to analyse and interpret transmitted informations.
Viewer by himself has no ´rational´ knowledge about subject during session. Finally after session, question is told to monitor like viewer, so discussion about impressions are good feedback for progress in RV techniques. This review is simple at known targets - about Bessler-Wheel however doesn´t exist any precise knowledge nor running engines are re-constructed or known.
Jelinski reported, during one of these review discussions one viewer told, within wheel wouldn´t turn something round and steady - but there is motion ´potato-shaped´.
Now I had drawn and analysed thousands of curves, at fluid-technology, at rotor-systems and at analyses of crop-circles, I ´invented´ bended- and ribbon- and looped- and apple-curves - however never potato-tracks. Every technician would have some doubts about technical abilities of that viewer, like I had - until potato-track of previous chapter Falling within Wheel appeared at my screen.
So I studied and reviewed once more these some 50 pages of minutes recording previous RV-sessions, in order to search for further ´inconsistencies´ or statements not recognized up to now. Word-by-word quotations are underlined at the following (so these texts are no links).
Recollection: viewer mostly don´t write complete sentences but keep fast follow of impressions only by list of words, inclusive grammatical mistakes - cause mind is not allowed to ´think-about´ but only has to make notes on daydream, uncritically. Viewers ´fly´ within area of target, that´s why drawings often show strange perspectives. By this understanding, quotes and drawings are to understand.
At upside chapter Mechanisms I mentioned diverse kinds of ether movements as basis of gravity, of acceleration like of inertia (cause I believe, right understanding of nature of appearances is essential for design of ´nature-conform´ techniques).
Motion´s Impulses within Bottles
Viewers described these occurrences resp. their usage by other words, rather strange like impressive. One viewer described engine like this: many pipes and connecting rods, slippery, exact, are many, rattling, bended pick, final part, lance-shaped.
For example, this viewer draws picture of final part some round: out of wrapping falls something outward. Aside are parts B and A, producing connection.
To process of movements viewer remarks: free fall, ahead, bended falling, spiralic, downside got more narrow, disappears, redirect better direction, upward sharp rising, redirection, very aimed, sharp limited, snappy.
Difficult to interpret: short chaotic phase, order by impulse probably by change of contact to part, flash-quick, light falling-through? Part B comes after part A, cause A can keep contact only for some time.
His summery is rather ´bizarre´: part A comes regularly by turning and allows falling-through of yellow parts or other parts (yellow parts remember to motion´s impulses). Whole stuff remembers at machinery for filling up bottles, where bottles are open downside and let go something through. This process is quick as a flash. Whole process is done within wheel, impulses fall fast into inner part of wheel, become extremly fast and side-effect is achieved. Parts fall down at staircase and become smaller (lost energy?). That what got less, re-assembles to new parts and process restarts again.
Yellow parts - like light? Based at my considerations, onto universal ether movement structure are impressed diverse additional movements - one kind of results gravity pressure, an other results light, many other patterns result many other appearances. Here, something got more by motion´s impulses and got less - and rest of ether vortices reassembles at upward phase. For me it´s phenomenal how viewers give vivid and graphic description of these physical processes.
Bended Time
An other viewer described energy as bounded to air/height, ´like wind floats and glides´, seconds-fast (realtime), like slow motion for me (other time) and movement coming from upside on the other hand circled, can go through stone.
He describes also motion of falling left side form upside, stop, some ´airy´, sloped diving in.. And once again: movement from upside with following circled motion, however not falling down, but dipping into some soft, what is not stone floor, hard earth. And once again: some rounded, sitting down, as if not weighting.
Third viewer sees control unit, large like television set, assembled by diverse parts, controlling opening-mechanism, lets in and out. He describes some pulsation, would like go out, on the other hand pulled in, is shifted again, resulting of is mass-growth.
This process of movements is repeated by next viewer: at start hesitant + braked, movement downward, goes fast ahead then slowly back, like by slow motion and he points out is urgent! and once more when certain point is achieved, time runs backward like slow motion, thus stretched/bended, is decisive factor, without bended time project is not to realize.
So it´s question, what´s bended or stretched, time or movement´s track. Motions however could be much slower than expected, so appearing like slow motion. Several times he points out, that´s urgent and decisive.
Stars and Rays
One viewer remarked at the moment ot be some k.o. and would have no idea,
however drawing this picture like stone, jagged, star-shaped, which is humming.
His mind remembered like baguette shaped, however more smoothly and nice polished, stuff would serve for power-transmission with little parts, gear wheel and lastly he comments is still in motion, strange enough.
When I first did read these papers, I couldn´t find any sense of that jagged stone-star and also I didn´t want to follow ideas of next viewer (cause I mainly searched solutions by wheels and round processes).
Nevertheless this viewer seams really to be within target and he remarked confidently there are diverse parts, which are shifted. He describes shifted movement to and fro within an area concentric arranged and he draws seven squared blocks of 5-6 cm with radial movements inward and outward.
Downside he draws again an in-rolling circle, where it gets narrow, together, dense. He is concentrated at inner parts, cause I am inside of engine, can´t see outer aspects.
Reading Coffee Ground
I can well understand readers describing these texts as confused stuttering and intension of interpretation like reading future off coffee ground. Other readers however might have found parallels to ideas of previous chapters.
I also didn´t know what to do with remote viewing - however that stuff is not only matter of fairytales, cause remote viewers often were able to produce information of clear evidence.
For me is impressive resp. I wonder, viewers even claim to see gravity effects in ´slow motion´. Funny is analogy (resp. how could one better describe increasing and decreasing volume of ether vortices of free fall and stop): bottle is filled up, stop, downside some stuff is flowing out, with side-effect, rest gathers, moving slowly upward.
This animation might point out, how difficult it is to recognize real process of motions. Who is able (without technical tools) to understand, what´s turning why what kind (without rational thinking about!) and to explain this process by ´feelings´. Like this animation, viewers saw Bessler-Wheel, through ´curtain´ of time and curtain of lining of engine, while Bessler-Wheel probably not only contented this single module.
If however these statements are true, if RV functions (and often was approved, RV works well), then consequences are far-reaching. Within ether (or morphogenetic field, or at RV called ´matrix´) not only are present all actually running occurrences and appearances, but they leave traces, by corresponding focus to read out even after hundreds of years. Everything is bound to anything within this unique medium - and lastly nothing lasts hidden. If this insight would become common sense, grave consequences would result in behaviour of everybody.
New Points of View
Viewers can not describe technical parts by keen brains and sober minded. Brain has no access to these informations. Only feelings and impressions of touching, smelling and tasting, even emotions of persons at target are available. Naturally, viewer also can ´see´ things and processes, however not by sober mind but some kind like contemplatively watching. Viewers also hear, however more like an unconcerned listening. Even more astonishing is, some viewer can not only describe technical processes and parts rather clear, but also intended functions of.
At these few sessions to target Bessler, all viewers told about fast falling and abrupt stop, about something soft which same time is hard, about circled tracks and diving in, about redirections and following rising upward. All viewers point out, it´s going on slowly, by nearby calming process, where aspect of energy dominates.
Review of minutes of RV-sessions, for me did confirm ´mass-growth´ by acceleration of bodies. New for me was, practically none of viewers told about ´round wheels´ and round movement´s tracks - while I mainly searched solutions by rolling of wheels within wheels or at least by round tracks.
At my concepts of solutions, I also avoided to use problematic constructional elements like glide-bearings or gliding joints. Nevertheless, ´potato-tracks´ are rather adequate to free falling, and these demand gliding elements, at least partly.
That kind of movement results, if diverse lever arms come into different positions, relative to each other. Then also impression of star-shaped arrangements comes up. At designs of previous chapter, this gliding to and fro (of joints) and star-shaped arrangement (of arms building triangles) is integrated (resp. leaded to review these RV-papers).
Additional Aspects
Up to now, I had not payed attention to strange stuff which should be soft and hard same time, similar however not like earth, into which parts ´are diving into´, after phase of free fall. This statement didn´t make sense for me.
In early days, when beer was delivered by horse-drawn carriages, leather sacks, filled up with sand were used in order to let fall barrels onto. Had Bessler installed sand-sacks for ´diving-in´ effective masses?
Up to now, I had not paid attention to round ´final part´, in connection with lever-arm-shaped parts (described as part A and B), both likely and ´changing´, following each other in regular intervals.
At previous concept are a backside and a frontside lever arm, where effective mass is mounted direct at end of both arms. Should there an additional final-part be installed for additional possibilities of movements?
Viewers saw downside right decisive change of movements process, mentioned there existence of ´heat´ (equal to energy-transfer), made drawings with inward-rolled movements, noted there something would become narrow together. So previous final-part there should become other shape or move other kind.
At previous chapters I did discuss, how fast wheel must turn, so mass at which radius within wheel could move at parabolic track. All viewers talked about free fall, however all viewers point out slow-motion impression of processes within stretched time. One viewer called this ´un-realistic´ slow movements decisive important factor.
Slow Motion
Bessler had build self-running wheel, e.g. in 1714 with diameter of 180 cm, turning some 26 revolutions per minute. At 25 rpm one revolution takes 2.4 seconds.
While twelve tenthseconds (half turn of this wheel) mass falls down seven meters. While six tenthseconds (quater of turning of that wheel) mass falls still 176 cm. This will mean, this wheel was not constructed for building-up maximum kinetic energy and for using impact of stop of free fall - but probably this wheel did work based on static un-balance of masses at arms of different lengths.
So probably phase of free fall only was used for replacement of masses onto larger radius. In general however, wheel turned much slower than adequate speed of free falling. Indeed, practically at all original drawings of Bessler-Wheels were shown ´deceleration-parts´ e.g. like hammer-mill or sluggish pendulums. This wheel demanded starting impact, afterward however must be weighted by power-output in order to keep wheel running further on.
Based on these aspects at following chapter Original Bessler-Wheel is tried to re-design ´calming´ slowly turning engine.
Evert / 15.11.2003
| Gravity-Machines | Perpetuum Mobile | Index / Sitemap |