This chapter will illustrate ether-flux and vortices are physical cause of gravity and inertia. Optimal machines for usage of gravity and centrifugal forces (as an expression of inertia) must be designed correspondingly to flux or vortices of ether or even to increase or produce these motions.
Ether probably will be carrier of all physical fields, so relations shown here will also be of interest to machines concerning electro-magnetic energy. Above that, here will be shown, how ´system earth´ by ether flux will produce energy in addition.
Chapter above, Material and Immaterial, did show some aspects of actual discussion about ether with concern to some physical and spiritual terms resp. my conclusions of. Here some of these aspects must be detailed once more and especially term of masse will be discussed and defined by new points of view. As a consequence, all gravity- and rotor-systems designed earlier must be reviewed based on these conciderations and new understanding.
Starting basics
Here, existence of ether with certain properties is assumed. As radiation (thus energy and information) can also be transfered within vacuum a medium must exist called ether. This carrier itself can´t be dedected by material equipement directly, so ether must be characterized as im-material. As we are involved in materia, we hardly can imagine a ´substance´ immaterial. Nevertheless, it´s not allowed to declare non-material stuff not-existent.
As ether will work as medium for radiation, ether must show wave-structure, thus vibrations resp. differences of pressures. Motions of a medium, e.g. atoms or molecules of air or water, must be faster than transmision-speed within that medium. So it must be assumed, motion of ether must be far beyond light-speed, not some faster but probably ´timeless-fast´ in relation to common understanding of speed.
Atoms and molecules seam to be ´hard´, can´t penetrade each other. That´s why speed and possibility of motion of materia is limited, all times reduced by mutual collisions. Materia is bound to space and time resp. our conciderations about space and time are only relevant for material occurances.
Immaterial ether is not bound to these restrictions, i.e. pressure waves may penetrate and overlay each other without restrictions. Ether also may run through atoms and even through elementary parcels. So compared with materia, ether is ´liquid´ nearby incredibly. So ether may be called all-penetrating or all-present, within and without of material particles. Immaterial does mean steady existing flux or vibration, so there will be nothing ´differed´ running some ´period´ long through any ´distance´. So terms of space and time may not be used in common sence.
Nevertheless, ether well may inter-act with materia. Free ether will effect onto materia by more or less pressure. Opposite, materia will have effect towards motion of ether. It´s absolutely possible, ether is the one and only base of all existence, while material occurances will only be special patterns of ether motion.
Ether waves can run through each other without restriction, whereby automatically one will be overlayed by the other. Inavoidable, thereby will be generated in-rolled movements, which will include twisted motion, again and again. Each outer vibration thereby will build a cover for each inner motion structure, so enveloped ether motion will be generated. These vibration pattern represent energy-units or information-units as well.
This rolling-in procedure may occure often, including motions again and again. Towards outside, units like this might seam ´hard´. Thus a smooth transmision from immaterial ether waves to material occurances will be.
Inter-action above, between ´free´ ether and ´enclosed´ ether motion, probably will depend on ´hardness´ of motion patterns, thus its relative degree of ´bulkyness´. So some kind of vibrations will have the effect of pressure from outside towards a unit, while other kind of vibrations will run through that unit without any friction.
Ether waves rolling towards earth, will have the effect of pressure towards materia, named gravity. As materia is enclosed within ether, at the other hand material bodies will show inertia. Inertia is commonly named a property of masse, so term masse must be checked and defined in relation to ether flux. Now following, these occurances will be illustrated by simple pictures and basic examples.
Overlay
At picture EVGRS 50 left side, horicontal lines are drawn, which will represent ether flux, running top-down onto earth. At A, a circle is drawn, representing a circled motion as most simple example of motion of a particle (in principle again a circled ether movement). That (here linear) front of pressure of free ether will run through that (here circled) pressure front of an inrolled ether motion.
At B schematically is shown, how these horicontal pressure waves will be impressed by that circled pressure motion. For example that pressure front in the middle, will be drawn in direction of circled motion, so left side decelerated and guided upside, opposite at right side will be accelerated downwards. Even both motions must be looked at to be immaterial (so will occure within extremly ´liquid medium´), motions will result quite similar to motions within material liquids. For an example, same pattern of motion would result, when a stick is turned circled within a material flux.
That middle pressure front thus will become shaped other kind. It´s pressure will reflect to following (here upside) pressure fronts, so also afterward pressure fronts will be deformed. Deformation towards upside and right will be less, cause extreme liquid ether will avoid this counter-pressure by partly passing by aside.
When this middle pressure front will come further downside, again will be pulled to left and some upwards again. After leaving that ´cause of trouble´, thus these pressure fronts will show other shape. Speed towards downside at a whole will be same, however these waves were impressed by additional motion.
That circled motion by itself will be impressed, for example deformed some kind towards downside, like marked at C. This displacement towards downside corresponds to free fall of a particle. When this particle however will find counter-pressure by a support, it will be pressed back upside at its old position and into old shape. The particle´s pressure onto the support does show ´weight´ of masse of that particle.
Motion shown at C, in principle will mark a circled movement, which is accelerated in direction of ether flux (here towards downside). At D analog to above is shown, how this spiralic moving ´cause of trouble´ will have effect on ether waves. Thereby, ether fronts will less be pressed upside and will be deformed less at a whole.
At E, opposite case is shown, where a circled motion will be accelerated against the ether flux. At F correspondingly effects onto pressure fronts are marked schematically. Here, deformation in upward direction will predominate, i.e. this particle would show much higher counter-pressure towards ether waves rolling top-down. This deformation of pressure fronts nearby will be same, after the ether wave passed that disturbance. Large distances of pressure fronts downside will mark, this particle won´t be supported from downside any more.
Overlayed pattern
At EVGRS 51 left side, deformed pressure fronts above are shown once more. At A that circle motion resting at its position is shown with its overlayed shape of ether waves. These overlays at a whole schematically are marked at B by dotted ellipse. Corresponding to turning sence, this ellipse is turned a little bit. In principle, this pattern of motion is impressed to ether waves as they walk further downside, thus in direction of earth´s center.
At C circle motion accelerated into direction of ether flux is shown in shape of a downward bended spiral motion. Versus ether waves this will be far less disturbance, correspondingly overlayed motion pattern (D) is much smaller (here marked by a thin dotted ellipse).
Overlayed motion pattern (F) will look totally different when circled motion is accelerated against ether flux (E). Here, that upward walking spiral motion will result strong counter-pressure, which will force downward rolling ether waves to large deviations (marked by strong dotted half-circle). Below, that strong disturbance will leave a pressless area, which at material circumstances one would call an area of suction. Also within these immaterial motions however, this will mean really high pressure towards upside, while downside only low supporting pressure will exist.
These pictures do show by simplest possible kind of motion, resulting overlays in principle. Instead of this simple circled motion, an atom probably will show ring-vortice shaped motions, molecules in addition will be enclosed by ether flux. At solid bodies, that ether flux will be shaped like a ´phantom-body´ (see chapter above). These (multiple) rolled-in ether waves of material kind thus will be included into a steady motion structure of free ether.
Shape and volume of these phantom bodies, however will depend strongly at motion of material body in relation to general direction of free ether flux. At G for example, conture of phantom body of a resting particle schematically is shown by ellipse-shape. If that body is accelerated into flux direction, its ´ether-envelope´ (H) will be much smaller. Opposite, a body accelerated against ether flux will show an enormous ´bow-wave´ (J) and a ´stearn-wave´ suction area.
Copies
Practically all material processes will cause friction, at theoretical conciderations mostly ignored. It´s ´obvious´, differences between theory and practice lastly will be declared by loss of heat. If now however, there are processes really without any friction, it hardly will be accepted.
These impressions of circled motion (picture EVGRS 50 resp. 51) onto immaterial ether wave is not only without any friction, but also without any loss of energy. Free ether shows that kind of liquidity to in-take a pressure without resistance into its own motion. Thus circled motion above won´t be reduced in speed, as an equivalent to acceleration resp. change of directions of free ether wave.
For example, circled motion above was looked at to be vertical, thus showing pressure versus and in direction of ether flux. If now a circled motion in horizontal level would be looked at, these pressure components would only work cross to ether flux. So free ether wave would be impressed only by horizontal circled movements, while circle motion again would be impressed by a downward motion.
As far as both flows are free or only few in-rolled ether, both impressions will be without any mutual resistance. Above this - and hardly to unterstand by experiences of material world: both flows will afterwards show more complex structures, i.e. will carry more information - equivalently more energy.
Both circled motions (in vertical or horizontal level) will be deplaced a little bit downside when ether flux did pass through. That´s effect of gravity, which either will determine free fall or (if support from downside will effect counter-pressure) will show weight of ´masse´.
After pass-by of a ´disturbance´ ether wave at a whole will show same speed downwards, but in addition the waves are impressed by (here vertical or horizontal) motion. If this passing through particles does repeat, patterns impressed more and more will show typical motion of materia.
When this process will be repeated often while the ether wave walks into earth, original ether pressure front (horizontal lines above) won´t practically exist any more. Ether wave will take more and more energy, in shape of copies of motions (of material parcels), without taking energy from giving parcels. The original free ether wave will become a picture of complex material structure, i.e. will mutate to a (chemical) element.
Heat
By this process within earth, original free ether waves become bounded within complexly in-rolled vortice structures. Inside these structures whole energy of motion-copies above is accumulated. That´s why not all ether waves rolling towards earth will penetrate whole planet undisturbed. Thus earth will show less outward radiation (at least other kind than inward-coming), so a difference of pressures will exist.
All material particles thus will be pressed by gravity towards earth center. Same time within earth, new particles are produced. Essential property of materia is, its particles mutually are non-penetrable. Particles hit onto each other, while enormous inner pressure (within its membranes or multiple shells, see above and chapter above) will work like springs, so both collision partners will push each other away.
As now within a volume all time more materia will be created and from outside all time a steady gravity pressure will exist, these ´balls´ will hit more intensively, will fly from one collision to next faster and faster. So molecular movements of high speed will be produced, which commonly is named heat. Also heat-motion represents energy, again here procuded without reducing corresponding amount of energy of any other part.
Ether ´falling down´ onto earth thus will show several effects. At first there is effect of gravity, i.e. of weight (of ´masse´). Second, additional energy will be produced by copy-process above, which is bound by in-rolled motion structures of new materia, thus represents energy within material particles. Third, based at increasing density of materia within earth, heat is produced by high speed of molecular movements, thus representing energy outside resp. between materia.
Heat within earth can move towards earth surface and heavy (chemical) elements may disintegrate. Energy produced (really a surplus of energy) by ether waves moving inside earth, thus partly will be availabe at earth surface or may radiate into space (however other form).
Big Bang
Last consequence of these conciderations will concern common world view. It tells, at the very beginning all energy being concentrated at one spot (and it isn´t determined where from this energy did come), since big bang energy is spread steady into space, until lastly be equal spreading of all motion this universe will die ´dead of heat resp. coldness´.
Opposite to this, here is assumed space to be filled up with free, immaterial ether (and it isn´t determined where from this ether came to existence). This ether isn´t static and spread equal, but showing flexible or elastic characteristics, vibrations and flows, thus local differences in pressure. By mutual crossing of ether waves resp. pressure fronts, inavoidable will be generated vortices and in-rolling motions. This process will repeat and produce occurances of material kind.
Originally existing energy of free ether flux within celestial bodies will increase, cause energetic material parcels are produced by copy processes above. An other surplus of heat energy will be produced by increasing densitiy of materia and steady gravity. Thus universe won´t end in structure-less status, but all time new structures and energy is produced. There is no end of universe, cause energy accummulated within celestial bodies again may radiate into space. As this radiation will come into ´empty´ areas of space (with less motion and pressure differences), complexe vortice structures will desintegrate (for lack of counter-pressures), so again free ether flux will exist.
Inertia
An other effect of ether flux is called inertia, commonly defined as a property inherent masse. It´s easy to understand, when a resting body shall be moved, energy will be demanded. However, it´s not obvious, that body now will move same direction and same speed on and on, theoretically unlimited.
When a body does rest within air and now will be brought in motion, air in front of body must be transported around the body to its backside. It will demand energy, to start that motion of air and based on mutual ´friction´ of air molecules it will also demand energy, to maintain that motion. Same will be, if a body resting in water shall be brought into motion. However, water does show higher density and is less ´liquid´, so higher (friction-) resistance will demand even more power.
Same time, that body must be moved within ether, its ´density´ is numbered by 1.08. If that body is moved within ´leight´ air, it must be moved in addition within a meduim like ´heavy´ water. Nevertheless, that body started once, won´t be slowed down by ether. Opposite, based on it´s ´inertia´ will auto-matically move further on. This difference in behaviour can be caused but by extremely different characteristics of materia (here air or water) and immaterial ether.
Phantom body
As an example for horizontal movement, here a ship will be looked at, shown in EVGRS 52 by view top-down (conture of ship schematically is marked by blue curves). Around this ship, a phantom body will exist in vertical direction, analog to pictures above. Ether waves will hold that phantom body and resting ship at its position.
When this ship now is started to move, it will first be shifted ahead within its phantom body, so ether asymmetrically will press onto phantom body and ship´s body as well. So starting of ship´s motion will demand energy. This thrust is demanded until phantom body will be shaped corresponding to new motion direction and speed. A phantom body of a ship with constant speed is shown at A (conture of phantom body schematically marked by green curves).
Conture of phantom body will show shape analog to ships motion within water. Far in front of bow a pressure front will be build (not to mix up with bow-wave, running from bow aside), e.g. where dolphins will ´surf´ ahead a ship. There, water will be transported aside, then by accelerated motion backwards, lastly back behind the ship (mo´vements in principle marked by red arrows). However, this analogy will only fit, when pressures and flows are compared with a submarine moving in deep water.
Totally different however ether phantom body will behave. Ether will take pressures of material ship without resistance and without any friction, will flow aside the bow and alsongside the body and back behind stern of ship analogly.
Characteristics of ether phantom body will also be different in vertical and horizontal direction. Vertically, this ship is steady pressed downward by rolling on ether waves. This ether flux, at least partly will flow through material and phantom body as well.
In horizontal direction, that ship won´t run against an ether flux, but against ether which will give way without resistance. In horizontal direction, thus ether flux through phantom and material body will be only small. So, in horizontal direction, ether within whole volume of phantom body will be carried with ship´s motion.
This will say, vertical ether motion (again without any resistance) will be redirected into ship´s direction, thus pressure fronts of ether waves will show diagonal ahead. So a material body in motion will pull with itself ether, not only within its volume but also within a much larger volume of surrounding phantom body. In vertical direction, the ether will be replaced steady, however much slower than at a resting body. Ether waves will remain longer within moved body (material and phantom body), cause practically will move a longer distance, diagonal and ahead in motion direction.
Acceleration / deceleration
If now that ship with constant speed once more will be accelerated, its position within phantom body will be shifted ahead (B). This will demand relatively few energy (compared with starting motion above), cause this motion-ahead will be done within a general motion-ahead of ether within phantom body. Partly, this acceleration can be looked at to be supported by pressure fronts of ether, coming from backside-up.
Opposite, if now this ship shall reduce speed, its position within phantom body will be shifted backwards (C). This will demand more energy than starting motion above and much more than additional acceleration above, cause now ether within ship and within backside phantom body will push material body ahead. Also these ether waves behind, moving in direction upside-down-ahead, will press ship ahead. On the other side, ether within bow-area of phantom body will run ahead ship slowed down, thus will build a suction area.
By soft acceleration, sucessively speed can be increased with few energy, while phantom body will become longer and longer (and some more wide), so more and more ether correspondingly within phantom body volume will move in horizontal direction. However one might doubt, whether kinetic energy will depend on half masse multiplied by square of speed (as common science believes). Resistance against deceleration (as expression of inertia) however, at no case will be based at masse-weight, but is based on pressure of ether flux, when passing ahead through slowed down material body.
Just occurances of deceleration do show, how much ether will be pulled with a material body in motion. The outer surface of that phantom body above does effect like a pressure front, thus like a membrane. Around this membrane most parts of ether flux will glide, again without any friction, practically building a coccon-like envelope. Ether within phantom body in contrary will mostly move by speed and direction of material body. At deceleration phase this ether will have effects e.g. like (liquid or loose) freight on a truck slowed down, so much more energy is demanded than decelerating only lorry by itself.
Masse
There is no ´hard´ materia, cause all material particles are diverse twisted structures of immaterial ether flux. Which imense amount of ´weak´ gravity forces, by multiple in-rolling at spiral tracks including one the other, is accumulated within one single atom will be demonstrated by nuclear fission.
That included energy of motion, towards outside shows nearby neutral, cause within shells or membranes these pressures will be symmetric in total, thus will compensate each other. Only by collisions between material particles, these inner pressures will have the effect of mutual, elastic back-pushing. All particles of a material body as a whole are hold together by additional ether cocoons, which will hold molecules e.g. within a grating structure. Thereby effects towards outside of single material parts also will be neutral in sum.
So there is no masse, which by itself could show any physical property towards outside (but chemical or electromagnetic characteristics). Effect of this assembly of enveloped motions within narrow space is only effecting counter-pressure towards free ether resp. vice versa, ether by its pressure fronts may impress its motion direction to a large amount of other motions within a small area. Into vertical direction this will show weight of resting ´masse´ or inertia while accelerating and ´weight´ again while decelerating.
That small importance of masse by itself is obvious, when two bodies crash together and kinetic energy is transfered by sudden impulse. At some circumstances, ´law´ of impluse or energy-constance won´t work well (resp. it´s assumed, tension within material or vibrations wouldn´t allow to transfer whole energy). Assuming above phantom bodies and resulting forces at acceleration / deceleration, results may well be explained: both phantom bodies inclusive their ether in motion will crash together and will compensate each other in relation of their volumes and speeds. Only remaining ether motion will have effect towards material body.
Density
In this connection, once more definition of ´density´ must be talked about. Some alternative physicans tell, density better would be related to surface instead of volume. Surface here must be definded as area, showing towards flux direction. At EVGRS 54 for example, two bodies shall be moved to left.
Both bodies (blue rectangles) at A and B show same volume, one will be moved lengthwise, the other crosswise. Around the one, a slim phantom body will exist (green lines), in front of the other a large bow-wave will exist and behind ´back-water´ area. Similar phantom bodies would show motions of these bodies within water.
At constant speed within ether however, this bow-wave wouldn´t make problems, cause based on extreme liquidity of ether no friction loss will be. At deceleration however, effect of ether will be like water. Whole backward ether motion now will effect thrust upon the body (and running-off bow-wave will effect like suction area). It´s obvious, body upside (A) will demand much less energy to slow down than that crosswise body (B) below.
If opposite one will look at acceleration of both bodies, there will be grave differences too. For example, a hammer will be knocked at both bodies from right to left. Above, ether within the hammer inclusive ether within its phantom body, after the hit will have to run through whole body. A lot of ether running lengthwise through that ´chisel´ will effect high acceleration of materia.
Ether (energy) of that hammer (same size) hitting at a part of that crosswise body (B), will run fast through that sheet. So this body will only vibrate a little bit, most of energy however will be wasted.
These examples do show, same volume and same density (in common sence) may show most different effects, when masse is moved within ether, depending on relation of surface towards flux direction. Correspondingly ether flux will show different effects towards materia, depending on shape of materia. On the other hand, by these examples it´s obvious, ´masse´ won´t have importance commonly assigned to. Essential importance however will have ether motions outside and inside of phantom body and ether flux within material bodies as well.
Evidence
Astronauts could easily demonstrate ether effects claimed above. Also at earth, existence of immaterial ether could be approved clearly, if only motions, accelerations and decelerations above would be checked in vacuum. Above this, proofs already exist, only two of will be mentioned.
When a thin tube will be put into a water bassin (Picture EVGRS 54, C), well known capillar effect will be shown. Ether waves above and around the tube will build a phantom body, which will protect ether- and air-pressure from inside the tube. Above this, while ether is exchanged within phantom body, by suction air will be pulled out of the tube. Also alongside outer wall of tube, phantom body will keep ether waves off. Also here, ether within phantom body will steady be renewed, however that pressure is much less than air pressure in general onto the water surface. So water is pressed upwards inside and outside the capillar tube.
At EVGRS 54, D schematically an other well known experiment is shown, where absolutely plane sheets are moved together. As the gap between both sheets will become closer, air pressure won´t come inside (molecular motion will build a self-closing system, see Fluid-Technology here). General air pressure at both sides will press together both sheets. However, if sheets again should be separated, much more energy will be necessary than air pressure would demand.
Ether flux around both sheets will build a phantom body, thus enclosing materia of both sheets within a common shell. So energy for separating sheets not only has to compensate air pressure, but much higher ether pressure in addition.
Centrifugal forces
An other well known fact may also show, which enormous energy ether motion around a body will effect. When a material body is turning, e.g. an excentric masse at a rotor, so around this body a phantom body will be build, its lengthwise axis showing in tangential direction.
By continuous bending of track into circle, that material body steadily is pulled out sideways of its phantom body. ´Masse´ there is without protection against ether waves, so pressure fronts of ether flux all time may deform motion of material particles.
The material body will pull ether with its motion, which however all times will run off into tangential direction. So there indeed an ether flux from inside towards outside will be generated. Pressure of that flux, spokes have to compensate by centripetal stroke work. So again, it´s not the masse by itself, but ether flux through materia, which will effect occurance of inertia.
Heavy and inert masse
Also these conciderations do show, inertia won´t be property of masse, but result of ether flux. At the other hand, here once more mutual effects between immaterial ether and material matter are illustrated.
A given ether flow will effect pressure onto material matter, like gravity will result occurance of weight into vertical direction. Ether thereby is active part, while masse will take the effect of weight passively. Masse here has no chance to escape permanent flow of pressure waves towards earth, so can´t get out of way of flux pressure.
Opposite, materia can have active influence towards ether, e.g. when materia is put in motion or materia in motion is accelerated additionally. Material body then will effect pressure into its motion direction onto ether resp. will shift ahead pressure front of its phantom body (as described above).
Opposite to materia, ether does show characteristic of flexability, thus can ´escape´ motion of material matter, thus can go away from material pressure front. Ether will intake pressure of material acceleration without resistance. Pressure front established thereby, within ether will be transmitted ahead without ´friction´. Resulting of will be occurance of inert masse, which will keep speed achieved by acceleration and motion direction as well.
Corresponding deceleration of masse however, now again will be effect of ether flux towards materia. Cause now ether carried along with phantom body will be flowing relative to decelerated masse. So masse at this process can´t be called inert, but masse here will show ´weight´ (not in vertical direction but into motion direction).
So ´heavy masse´ can be called occurance, where ether flow will show effect towards material matter. On the other hand, ´inert masse´ only can be called that process (after acceleration of masse a pressure front within ether is initialized, same time an ether phantom body is build, carrying ether with itself), where materia will move further ahead without friction, cause moving in the ´slipstream´ of a pressure front resp. within its phantom body.
Flexibility
Once more, here characteristic of flexibility of immaterial essence shall be pointed out, in contrast to density and heat of material occurances.
In my oppinion, ether must be concidered as un-dividable essence, based already by ´timeless´ speed of immaterial occurances. As soon one thinks by parts, there will be chaotic motion, collision, friction, delay, thus time and space. Above this, there can not exist any totally differed parts, but lastly only motion. This motion can´t be ´nothing within nothing´, thus ether must be moveable within itself.
Like e.g. molecules of air by different tones within a volume may move by different intensity, so ether may move intensive any way within itself. Ether will show no ´molecules´ and thus no density and thus no heat, but nevertheless can take different information structures resp. energy units in shape of most diverse motion patterns. Based at its indivisibility in general, ether however may in-take informations resp. energy practically without delay, can carry and give away again. So here, ´flexibility´ was called characteristic property of ether, allowing highly different potential of flux pressures within a volume.
Even ether essence in principle is un-divided, it´s absolutely not excluded there will come up relatively seperated units, typically by in-rolling motions. This ´homogenity´ just is essential condition, a smooth transmision from immaterial to material occurances is possible and really existing. Each divided unit, at its border surface will demand cooperation resp. balance of outside and inside occurances, thus again more or less smooth transmision. That kind, materia can´t be separated from that single ´Unique´, here named ether - and all mankind named this stuff the ´essence of all being´, whether spiritually or mentually or materially.
Lastly, here three ´phenomenas´ shall be mentioned, where definition of ether above might help to explain occurances. All these processes will concern implosion, like Schauberger talked about and did try to manage by experiments, many years ago.
Cold fusion
At lots of laboratories experiments by ´room temperature´ are done, where obviously chemical elements are transformed resp. energy will become free. Common characteristic of this cold-fusion is, experimental equipment will become cold. It´s often supposed, environmental heat will be used for energy earnings. Based on ether definition above, these processes could be explained other kind.
Less heat of outward experimental equipment can only occure, if inside amount of material particles (each volume) will be reduced - or molecular movements will be reduced. This might happen, if intensive standing ether waves would be produced near by near, within waves troughs molecules would be hold at practically same place. Thus molecular movements would be reduced, motion intensity of ether correspondingly inforced, so energy tranformation could show effects towards outside. On the other hand, that highly increased ether pressures could lead to unbalancy at molecule- or atom-membranes, shells could be broken and thus elements transformed with energy output.
Cavitation
At fast-running turbine- or prop-blades, cavitation will effect undeclared destroy at even hardest metall, combined with luminescence. Common explination is, by pressure peaks water will evaporate and gas-bubbles afterwards will implode.
As discussed above, centrifugal forces will effect ether flux within material matter, while masse continuously will be pulled out of its phantom body. Also water here is in motion, thus will carry ether with its motion, additionally local vortices might show extremly fast flows.
When water hits onto blades, water will abruptly be pressed into other direction. Ether flux of water and ether flux of blades will crash and, by coincidence, might add to most extreme local pressure. Material of blades isn´t protected by phantom body, so that pressure might hit onto material surface directly. At border surfaces of molecules or atoms thus an inside / outside unbalancy thus severe could occure, material parcticles really will disappear into ether.
Water-car
Dingles water-car actually is discussed often. There, water will be prepared special kind and (structured) gas will flow to the intake. Already at half of compression phase, ignition will be done.
Wolfgang Czapp e.g. supposes, an implosion will occure, followed by multiplied production of gas at expansion phase. Also here, the motor will be rather cold. In order to ´structure´ gas above, e.g. electric coils are used, which by itself might reduce fuel consumption.
By ignition and combustion, molecular movements are intensified, normally with chaotic motions. As molecules are prepared electormagnetically, ignition spark may keep relativ well ordered structures of gases. Within round cylinder, thus motions could show standing waves of molecules and same time ether motions would be focussed correspondingly.
As motions thus preferably will move between cylinder walls (thus twodimensional), piston could press together quite easy (in third direction), for example like strings swinging at parallel levels. Like above, also here ether will take partly molecular movements energy. In addition however, ether motions will be impressed by typical motions structure of gas molecules.
When now piston at expansion phase will give free third dimension again, molecules by coincident collisions will fill up this area, so standing waves will disappear. Pressure fronts of ether now also will spread into all dimensions, will cross each other and overlay. Based on structures impressed before, indeed additional materia could come to existence. Increased density of gases will push down piston in expansion phase.
As examples, these three unsolved problems by sure will concern ether. Probably theories above could help understanding. Here however, gravity or inertia is expected to be useful for earning energy.
Using gravity and inertia
Above was shown which kind of overlays and pressures will result, when masse is accelerated with or against vertical ether flux. These differences might be used for earning energy. In principle it will be important, to accelerate masse into downward motion according to ether waves and opposite, to decrease speed in upward phase against ether flux. A second possibility, long time searched for in vain, would be to hold a masse all time at one side of an ´ether-wheel´. At later chapters, this aspect will be detailed.
Also by conciderations about inertia, different situations while starting, accelerating or decelerating motion speed will occure. It was pointed out, how material body and phantom body as well will pull ether with their motions. Even by rotating masses high speed, it´s obvious how much ether a material body will pull with its motion. When material matter is pulled off its protective shield of phantom body, lots of energy are demanded - or could be used.
Above this it was shown, shape of body will have essential effect at acceleration and deceleration. Inertia is primarily not a property of masse, but a result of ether flux through material matter.
So at the one hand, all conciderations about gravity- and rotor-systems must be reviewed resp. totally new designs must be created. On the other hand, now quite new aspects for solutions are available, for example to generate or at least to intensify ether flux in order to use energy surplus. These points of view will be worked out e.g. at further chapters of rotor technology.
Evert / 20.01.2001