At a congress at Zürich concerning Free Energy, at three days some 150 participants took part. Referents of many countries refered about lots of subjects. There, I reported about my workouts about crop-circle-maschines, demonstrated that Centrifugal-Power-Spider and an experimental model of Felix Würth.
Spider-Model
Friends of mine had constructed a version of Centrifugal-Power-Spiders. However, that maschine didn´t show overunity. This could be expected, as this maschine was designed exactly corresponding to that ´phenomena´, physicans had talked about. As I could discover that phenomena to be a bluff, that maschine naturally couldn´t work.
At that concept, masse was slinged out along a radial rod (analog to known experiment with glas-pearl, outwards and tangentially excellerated at a rod). However, by this one-leverarm ´pendulum´ no sling- effect may occure like at two-arm pendulums (used here at diverse concepts). Above that, at centrifugal power spider, a round excentric wall as used, but by practically constant turning no optimal track of masse-movements could be achieved.
So, this concept of Centrifugal-Power-Spider a total flop must be called. It´s just too bad about time, friends of Implosion-Association (at Black Forest) did spend constructing that perfect model. The only positive: that model did work nearby without losses - as an automatic gear with but mechanical parts.
Concepts of other crop-circle-maschines not at all are flops too, cause they work with sling-effect based at several leverarms and do use different acceleration/deceleration processes. Participants at that congress were interested in my descriptions of concepts and maschines. However it´s an open question, which model will be constructed next and how my suggestions will be approved.
Würth experimental model
Felix Würth could manage in 1999, to demonstrate overunity by a simple model. This was a great moment for me, cause first time a predicted effect was confirmed: that of my Excentric-Nopp-Gear. As a present, Felix Würth did give me that very first, very simply constructed model and I could show and demonstrate that maschine at Zürich.
A rotor-arm (red disc) first will be started turning (by the rod downside left). Both rotors (these two gear-wheels outside) thus too will start turning, cause they are connected by teeth with the central gear-wheel (at first standing still). At these rotors, excentric masse is installed (brass-discs, showing backwards to achieve additional ´boomerang-effects´), which will move at apple-shaped tracks (see below). At theses symmetric tracks, all forces in sum will be balanced.
If now, the central control-wheel (by black rod above) at right time will be moved ahead and/or back, rotors can be accelerated to enormous speed. These control motions, but some millimeters may take, in sum will afford no power. At demonstrations in Zürich, some fifty people did manage within few seconds, to accelerate the rotors thus fast, turning tremendously, experiments had to be stopped.
Symmetric track with different phases
At EVGRS 03 shematically motion of a rotor system is shown. A rotor (RO, in shape of a gear-wheel) is moved around system axis (SA) by a rotor-arm (here not shown). This gear-wheel will roll around a fix gear-whweel (FZ, German Zahnrad). A masse-point (MP) at the rotor outside will be looked at, its radius marked every 10 degrees. That masse will move at an apple-shaped track. All forces thus are balanced, even amount and direction of forces are very different.
As for example, masse downside right is thrown outside, the rotor will ´screw´ ahead by centrifugal force. That sling-effect will take until outside right, high inertia there will ´move´ masse automatically to upside right. Like a whip, masse now however won´t follow futher acceleration. It will afford energy, to bring the masse to its outmost position (here upside).
Later, when the masse will be positioned ahead of the rotor axis (upside left), inertia will pull the rotor ahead, as the masse will sling inside. Leftside below however, masse wants to turn the rotor counter its motion. As the masse wants to stay outside, below left will take some energy, to push masse into its inner position. Thus, there are quit different phases with positive and negative momentums with regard to systems turning.
Asymmetric track with overunity
When positive momentums can be forced and negative momentums reduced (with regard to systems turning), over-unity will be possible. By motions at control rod at model above, exactly this is achieved. That manual control-motions can drive to a certain speed, by skill, feeling and sence of hearing. Technical realisation however, extremly difficult will be (at the moment, by Würths small resources). While the rotor-arm will turn constantly around system-axis (for using energy), turning of rotor around its own axis must occure differently (plus/minus a third), in principle as shown at picture EVGRS 04.
At sling-out-phase below right, masse must have time to come to an outward showing track. Then, some force must be invested, so masse will fall outside with high speed. Upside right however, again motion has to slow down, waiting until masse (by given inertia) will come into position ahead of rotor-axis (upside left). From here, interia will pull the rotor ahead and by ajusted turning-speed a relative long phase can be achieved for decreasing inertia. Afterward however, rotor-turning must be accelerated quickly, so the rest of inertia will do that lastly sling-inside of masse to its inner position.
That track compared with apple-track above, thus will show some flat sections, but also some sections stronger curved. This track can be achieved by control-motions at central gear-wheel. However, that central wheel could be fixed if only un-even gear-wheels would be used (thus like my ´Exzenter-Nopp-Gear´ above). That purely ´passive´ control, no energy would afford at all. That technik however is to realize but hard. That´s what Felix Würth does try to manage now.
Results
The simple shape of Centrifugal-Power-Spider clearly was discoverd to be too simple at all. All other concepts of crop-circle-maschines are designed much more complex, using real sling-effect. That effect, also at this kind of Würth-Swing-System is used. Already by this very simple constructed experimental model we could demonstrate well, how that common symmetry of usual centrifugal forces can be broken, thus huge forces are achieved, with effect outside system, thus usable as free energy.
The aim of constructing real perpetuum mobile is unchanged. It could be achieved by crop-circle-maschines, and also by Würth-Swing-Systems. Above this, here further solutions will be shown soon.
Evert / 25.10.2000